Asante-technologies 10NIC-PCITM Manual de usuario descargar pdf (Pagina 10)

Page 2-2

Installation

A network adapter is sensitive to static electricity and must

be handled carefully. If you do not handle the Asanté

10NIC-PCI adapter properly, you can damage it and/or your

computer.

Turn off your computer’s power.

Disconnect the power plug from the computer.

This step is required because some computers still provide

power to the PCI bus even when shut down.

After opening your computer, touch the metal chassis to

discharge any static electricity on your body.

Open the network adapter packaging and remove the

Asanté 10NIC-PCI adapter.

Immediately install the Asanté 10NIC-PCI adapter in your

computer, as described below.

Install the adapter

If there is a metal or plastic plate blocking the opening for

the card slot in the back of your computer, remove it.

Align the Asanté 10NIC-PCI adapter’s edge connector with

the PCI bus slot.

Push the Asanté 10NIC-PCI adapter down into the slot until

the adapter locks into place, as shown in Figure 2-1.

▲

Important!

Ensure that the Asanté 10NIC-PCI

adapter is

fully

seated in the PCI slot before starting

the computer. Never “wiggle”, insert, or remove the

card while the computer is plugged in or powered on.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 49 50

Sin comentarios

Asante-technologies 10NIC-PCITM Manual de usuario Pagina 10